Define the interfaces
Approve the duty, layout, piping connections, utilities, receiver arrangement and upstream/downstream permissives before fabrication.
Pneumatic pump systems
Less site assembly.
A clear start-up sequence.
Factory integration is designed to reduce site work. Standard, agreed installations can be supported remotely when suitable local personnel and interfaces are in place.
From approved design to production.
Assemble & test at the factory
Check the agreed skid assembly, instruments, valve operation and control sequence against the factory acceptance plan.
Position & connect on site
Qualified local installers complete the foundation, product piping, power, compressed air, venting and agreed signal wiring.
Verify & release to production
Complete site safety checks, leak checks, interlock tests and product trials. Confirm the operating recipe with SINOSEN remote assistance or the agreed service scope.
Know what each side provides.
| Scope area | Responsibilities to confirm |
|---|---|
| Agreed skid supply | Vessels, frame, skid pipework, valves, instruments, control cabinet and factory tests within the signed scope. |
| Site provision | Foundations, off-skid product pipes, power, compressed-air supply, receiver/vent arrangements, external wiring and local permits as agreed. |
| Start-up acceptance | Local inspection, utility checks, safety and interlock verification, product trials and the approved operating settings. |
Technical questions, answered
Does “modular” mean no work is needed on site?
The skid is preassembled and factory-tested to reduce site assembly and tuning. The site still provides the foundation, product pipes, power, compressed air, vent arrangement and agreed control interfaces. Local checks and commissioning acceptance remain necessary.
What does 1.0 MPa mean in the source specification?
It is a design reference for a vessel configuration, not a universal operating pressure or a guaranteed delivery pressure. Each project needs an approved vessel rating and operating envelope appropriate to the destination and duty.
START WITH THE DUTY
Replacing a rotary or gear pump?
Share the current pump model, maintenance problem and operating duty. Compare a pneumatic system against your existing installation using measured process data.