Hygienic systems
Product-contact finish, air treatment and cleaning provisions specified for the hygienic duty.
Explore the solutionBy material
Transfer selected food ingredients.
Build a hygienic system around the characteristics of your glucose syrup, sauce or compatible liquid ingredient.
Understand the material. Define the duty.
Foaming, oxygen sensitivity, allergens, particulates and microbial controls can be more decisive than viscosity. Dairy and other sensitive products are not assumed suitable without a specific hygienic and process review.
What the system design addresses
Agree product-contact materials, air treatment, surface finish, cleaning validation and batch segregation. Validate the complete route with the actual product and its cleaning recipe.
The data that makes selection accurate.
| Data group | Details to provide |
|---|---|
| Product properties | Viscosity at operating temperature, density, Brix where applicable, solids or crystals, foaming and air-contact restrictions. |
| Transfer conditions | Required average and peak flow, horizontal distance, elevation, pipe diameter, bends, back pressure and receiver conditions. |
| Utilities & hygiene | Available air pressure and sustained capacity, power supply, cleaning method, material requirements and applicable site standards. |
Build the right solution.
Pneumatic vs. gear & lobe pumps
Compare the transfer principle, maintenance profile and whole-system operating cost.
Explore the solutionSystem selection guide
Prepare the process data for a focused technical proposal.
Explore the solutionTechnical questions, answered
Can it replace every gear or rotary lobe pump?
Replacement is application-specific. We check viscosity at operating temperature, solids, air compatibility, flow stability, pressure drop, hygiene and total compressed-air cost. Metering duties, oxygen-sensitive products and hazardous fluids need separate review.
Does a dual-vessel system guarantee constant flow?
Alternating vessels can support continuous feeding and reduce transfer interruptions. Instantaneous outlet flow is not automatically constant. Valve transitions, air supply, pipeline resistance and receiver design must be evaluated for the required flow profile.
START WITH THE DUTY
Replacing a rotary or gear pump?
Share the current pump model, maintenance problem and operating duty. Compare a pneumatic system against your existing installation using measured process data.